This is not a conversation about guns. This is a conversation about items that have withstood abuse that are near unbreakable.
Some items I have heard referenced as AK47 of:
Gerber MP600: It’s a multi tool
Old Thinkpad Laptops
Mag lights
Toyota Hilux
Old Thinkpad Laptops
This.
panasonic microwave from 1996. I hope i don’t jinx it by posting about it here. Gigabyte Ultra Durable mainboards. IBM Model M keyboard PROXXON tools
Bodum French Press
Dynavap DHV
Buffalo Bicycles
Vitamix Blender
I can’t find “DHV”, I guess that’s an old model? What would you recommend for something modern that “just works”?
DHV = dry herb vape.
All the dynavaps share the same rip so pick any one you like. I just use the basic stainless one.
If I were to get a new one today I would likely get the TinyMight v2. However I cannot speak for its reliability as I don’t have one.
Damn that’s a pricy toy! Anything more entry level but still good? I think I might be down for a manual one with a torch.
Akai 4000ds Reel to Reel tape player. So many are still working, built like a tank. They’re super cheap on the used market.
Shure SM58/57
SM57s still can get roughed up pretty bad with the plastic covering on the front of the mic (especially if miking a snare drum with a less than precise drummer). SM58 will survive a nuclear war.
That metal toaster we got for a wedding present. It was apparently someone’s parents wedding present from the 60’s. We had it for several years until a friend jammed a bagel in it and melted the cord. I replaced the cord and we used it for another several years before losing it in a move.
I like to believe someone found it and it is still toasting to this day.
Was it one of those automatic toasters? Technology connections made a video on it.
There is a Sub-Lem for that: https://slrpnk.net/c/buyitforlife
Thank you!
I thought we called them communities, but honestly I like sub-lem better. Let’s switch if we haven’t already.
Aeropress coffee maker.
Its like 20$, works really well, very simple design with few things to break.
What’s a French press? I’ve only seen drip pots in my life so I’m completely ignorant to the coffee world.
It’s like a small pitcher with a movable filter, you put in the ground coffee, hit water, stir, wait, push down the filter with the grounds, pour off the coffee with most of the ground staying in the French press.
So why not use a dripper? I’ve always wanted to get into coffee and want to try an espresso so bad lol
So why not use a dripper?
Whereas a drip just passes through the coffee, a French 0ress is more of a steep. You get a stronger taste from it than you would on a drip.
Espresso is a whole other thing, expensive to get into at home. It uses a much finer grind and (IIRC) the water is pushed through under pressure.
Wild. That’s kinda intricate coffee for most people is just a simple process and keep moving. Thanks for the knowledge! I appreciate the write up.
French press is basically the same work as a drip machine, but a different shape. You just heat the water seperately and then pour it and the coffee into the French press, let it sit, press the plunger down, and pour. Actually takes slightly less time than any cheap dropper I’ve used and runs 0 risk of burning the coffee (drip machines like to put heating elements into their bases to keep the pot hot, this can burn the coffee and ruin the flavor, French presses cannot burn coffee because they cannot add heat)
Espresso is finely ground coffee that uses steam pressure to brew (thus why espresso machines are fucking expensive, my mr coffee unit was 80 buck), it’s an involved process (worth learning gif you’ve got 20m to make a cup of coffee every time) but very good if you use beans you like AND you like your coffee flavor strong
I switched to a French Press recently-ish. Instead of 4 or 5 cups of weaker coffee from my single serve drip thingie, I have 2 strong cups from my French Press and am ready to go. I’m thinking about trying a pourover to see how that is. Espresso is tasty and strong, but I don’t think I’d want it NEARLY enough to justify a machine. I usually only do espresso when I’m traveling, makes me feel fancy having a latte in the big city haha.
All that said, coffee is very individual. There is no “right” answer. If you’re happy with drip, than drip is the way. :)
The EV 635A. Built. To. Last.
http://recordinghacks.com/reviews/tapeop/electro-voice-635a/
I swear to god - on a dare I used one as a hammer and it lost 0 range on the SA.
Toughest mic and best DR of it’s 1965 class. Still a viable non-phantom , mono drum or ambient mic.
True believer!
Carolina Outdoor Work Boots.
Like wearing a bulletproof vest on your feet.
Thank you for the recommendation :)
I’ve been searching for steel toes ever since I was burned by Red Wings.
Rice cookers.
You can get really simple ones that just work and due to little components they will last a while. IMO they’re really worth it if you cook rice often or can’t for the love of god not mess it up while cooking. They’re really cheap as well.
The AK-47 is a specific product from the class of assault rifles, whereas “rice cooker” product class, not a specific product of a class.
Ah right, the post confused me a bit.
I recently bought a zojirushi rice cooker because of their reputation for making perfect rice and lasting decades. So it’s the AK of rice cookers. Or more like the AR because it was $200.
My man… 200 for a rice cooker, does it at least give you a reach around?
It even plays a happy little tune while it does it.
Okay, I’m sold.
To be fair there’s probably almost no moving parts in a rice cooker. Someone mentioned cast iron pans. I think that’s a fair example.
Other people are saying “cast iron” or other broad brands/categories, but this is the only one that doesn’t fall under OP’s request?? Nonsense.
MSI motherboards. I’ve seen one fail out of 1000+.
The P4$.FL 44 BF.A OBVIOUSLY guys why has no one mentioned it? Jesus Christ it’s like you want them to break!
^The comments in this thread
Pre-2010 Toyota Corolla
Gotta be the KitchenAid mixers no? Especially the older ones. I have a friend that has one from his grandma that’s over 50 years old. If anything breaks, it’s usually a gear or something simple to fix, and the parts are easy to buy and generally cheap.
The mixers are not exactly cheap though… and their other stuff is now mostly made from plastic (like the food processors for example)
I’ve managed to get a hold of 3 of the old ones through garage or estate sales, but yeah the ones that are brand new have plastic parts in them which drives me crazy. But you can at least 3d print what you’re missing
