• Brainsploosh@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    One issue for a vehicle allowed in traffic is that ypu typically can’t have things sticking too far out of the vehicle in any direction lest someone drives into them. Thus long haulage is put on long beds, even when not very heavy.

    Advantages of long beds is also that you can better secure your load along the length, can use standardised vehicles and parts, as well as have an easier time with load balancing and view management.

  • davetortoise@reddthat.com
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    It would “work”, but it would be aerodynamically unstable so would be limited to low speeds (<~25mph). This is why this configuration is quite common in construction/industry site machinery, where high speeds are unnecessary and unsafe.

    • Rubanski@discuss.tchncs.de
      link
      fedilink
      arrow-up
      0
      ·
      5 months ago

      But why not make the windscreen the width of the vehicle, maybe wrap it around a bit. Should be similar in aerodynamics?

  • BarneyPiccolo@lemmy.today
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    Don’t you hate it when you have a genius idea, only to find out someone else thought of it long ago? Nice try, Einstein. Back to the sandbox.

  • melfie@lemmy.zip
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    Welvin Da Great called and is asking whether his friends Candice and Dick can fit in the truck.

  • rumba@lemmy.zip
    link
    fedilink
    English
    arrow-up
    0
    ·
    5 months ago

    I would fucking by the real version of that.

    conditions:

    No more than one computer.
    Rolling chassis frame with a hitch.
    Left hand drive.
    Good HVAC with front and rear vents.
    Physical controls for everything, giant central screen, no cellular.

      • 87Six@lemmy.zip
        link
        fedilink
        arrow-up
        0
        ·
        5 months ago

        not one of the weird oversize impractical monstrosities that so many people seem to swoon over these days

        I heard a real kicker recently. It was something like

        My truck looks like it shouldn’t be able to haul it but it can. Yours like it should be able to but can’t.

        Best instagram roast of a modern truck guy I’ve ever seen.

        They were arguing on a post about that guy’s massive grocery getter where he was defending the purchase, as usual.

          • 87Six@lemmy.zip
            link
            fedilink
            arrow-up
            0
            ·
            5 months ago

            Hahah brilliant

            My dad and his workmates just use a VW Sharan for construction work. By the stuff they do to it, it’s impressive that all 4 wheels are still attached.

            It always baffles me when people say they NEEEEDED to buy a new work truck when I see how dad uses their sharan at work.

      • Fuckfuckmyfuckingass@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        5 months ago

        I’ve got some big ass American iron too, but it’s old and actually worth a shit. Never understood lifts you need and ladder for, and 3’ beds. Totally worthless vanity boosters.

        Trucks are for doing shit, not hauling your sorry ass to the grocery store.

      • zod000@lemmy.dbzer0.com
        link
        fedilink
        arrow-up
        0
        ·
        5 months ago

        I had a giant metal ladder fall off of the top of a work van and come right at my windshield while I was driving to my own wedding. i barely braked in time, but it had some serious Final Destination vibes. All things considered, I still think that the scariest thing that day was the final bill for the wedding.

        • justme@lemmy.dbzer0.com
          link
          fedilink
          arrow-up
          0
          ·
          5 months ago

          good that it worked out at the end. otherwise might have been the worst day of of your wife’s life instead of the best. I’m quiet happy with my weddings Bill. we needed an official interpreter, because we have different mother tongues, which was like 100€ and that’s it.

          • zod000@lemmy.dbzer0.com
            link
            fedilink
            arrow-up
            0
            ·
            5 months ago

            We got pushed into having the large wedding that our parents wanted and what we were told we were “supposed to do”. Though it was beautiful, we both regret it. You are being much smarter about it.

    • nullspace@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      5 months ago

      I wanted to get one of those tiny grandpa trucks when they were going for like $4k new, but apparently they’re illegal everywhere in the US. We’re stuck with $60k “entry level” monster trucks.

      • Fuckfuckmyfuckingass@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        5 months ago

        They’re illegal in some places, but I think they’re mostly fine. The deal is you can’t import a foreign made car unless it’s more than 25 years old, so the poor American car companies don’t have to compete.

        The real scam is the importers get 'em in Japan for a couple hundred bucks at auction, haul 'em over here and sell 'em for 8k plus. They’re pretty rad, but parts can be kind of a bitch.

    • 87Six@lemmy.zip
      link
      fedilink
      arrow-up
      0
      ·
      5 months ago

      That thing looks like a contraption I built in besiege or some game like that

  • JimVanDeventer@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    In a collision, you are much safer if you are facing backwards because your spine aligns with the back of the seat instead of you rag-dolling forwards. So turn those seats around, too. The design is very human.

  • mlg@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    5 months ago

    As someone else already mentioned, these do exist but you don’t see them on the road because it usually easier to just get a bigger truck without all the quirks.

    • OwOarchist@pawb.socialBanned
      link
      fedilink
      English
      arrow-up
      0
      ·
      5 months ago

      My minivan can carry items up to 17ft long on the inside, if you arrange it properly, going all the way from the back gate to the windshield.

  • jj4211@lemmy.world
    link
    fedilink
    arrow-up
    0
    ·
    5 months ago

    Funny. I was thinking how cool it would be if an EV truck with a frunk had a midgate, fold down front passenger seat, and ability to open the dash somehow to pass though very long things into trunk area.

    • Rivalarrival@lemmy.today
      link
      fedilink
      English
      arrow-up
      0
      ·
      5 months ago

      The Bollinger B1 and B2 were supposed to have exactly that. A central passthrough all the way from the back of the bed to the front bumper. You would have been able to haul 20’ lumber entirely within the vehicle.

      Of course, their $125k price point for a no-frills electric work truck was twice as much as three-row luxury SUV pretty much doomed them from the start. If they had targeted a price point suitable for fleet operations, we’d all be driving them.

      • jj4211@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        5 months ago

        I did recall vaguely something like that, but couldn’t remember what it was, thanks for that.

        But absolutely, especially if you had something like a 4.5 foot bed normally, but between frunk pass through and tailgate with load stop you could carry some 16 foot long planks… Something you might rarely need to do and not with a lot of planks, so a huge bed is pointless most of the time.