You should be able to bust it open using liquid nitrogen and warn water. I don’t think that the glass is made for being able to tank temperature differences of over 200°C
A crowbar to the side is what eventually broke it open.
And no one went up to it with an angle grinder? Pretty sure you can cut it with a diamond blade.
the plastic in the lamination would foul it.
Personally… I would have gotten a hammer-drill and put a chisle bit on it. It’ll take time but you’ll get there. Alternatively, I’d attack the seam around it (Cutter spreader should take that nicely.) (you can rent a hammer drill for like… 50 bucks. and I know you can rent various types of cutter spreaders, too.)
Go on facebook marketplace, buy cheapest car near me that runs rhe have “car accident” in the wee hours.
Your comment is the fifth from the top in my view. And I had already decided to crash a car without airbags into the sign. Why wait for the wee hours? Just do it®
Legit? Theres been several incidences worldwide of people driving cars into crowds of people and I dont want to get accused of domestic terrorism or have to beat a bunch of public endangerment charges in court.
I mean its 3 MILLION DOLLARS! but its also only 3 million dollars. If I have to replace the bus stop, pay a bunch of lawyer fees, have my licence revoked for a year or two, possibly have charges on my record that would make it hard to get a job… Its “life just got a lot easier” money but not quite “Set for life”
Pwffft they’re trying to break it with their feet, so cute.
In Brazil they wrap ATM s in chains and rip them off using trucks. Then take the ATM to a safe house and bust it open. That is happening since 1990s.
I was surprised when I saw someone doing the same in Australia, with a constructions site digger. I think it was last year.
Conclusion: Brazil exports crime 🤣🤣🤣🤣🤣
That’s the standard practice in most countries- if you take the whole unit you can break into it later!
Unless your partner in crime is a SKANK!
we had a rash of people doing that to ATMs in the US, too.
This sounds like an absolutely terrible idea. Aside from the people that will hurt themselves trying to break that glass, it’s a public bus stop. People will hurt bystanders and damage the bus stop and make it in general a place no one wants to be because of idiots constantly hurling stuff around or kicking it while you’re trying to wait for the bus.
If I was driving the bus I would just brake a little too late when arriving at that stop.
Find a spark plug, crumble, embed in shoe sole by stepping on it, jumpkick glass, become legend.
That helps with the glass, but bulletproof glass uses multiple polymer layers and tempered glass layers alternating.
So you would only get through the top glass layer and do nothing to the polymer layers or 2nd layer of glass.
aren’t there any methods, like some big hammer to smack it after you break that layer. you have all the time in the world, i wonder if it pays out to travel there smack the glass and take 3mil$
Hammer drills are basically “small” jack hammers that can also operate as a drill. Put it in hammer mode and repeated chisel at it. it’ll take some time, but eventually the glass will be broken and you can then deal with the polymer layers by yanking.
The problem is that glass absorbs energy to break, polymer deforms to absorb energy. So you have something absorbing energy in two different ways that robs kinetic energy very well.
Even just a normal household double pane window with one thin layer of polymer on both panes will take a long time to bust through with a hammer if the outer polymer is bonded to the frame appropriately. If you put paper tightly between both panes top to bottom, you would be in for a task because the paper reenforces against the deflection the hammer imparts.
You aren’t allowed to use tools with the money case, but ignoring that, you could shoot it with a .50 cal AP round towards the top and almost certainly make it through and then you just hammer and crowbar down to get the cash by peeling away the glass.
The other way you could attack it is to just drive a car at the far side from the support and hopefully peel the glass away from the frame enough to get in.
Even taking a hammer to it would be a laborious task to make any meaningful progress in a reasonable amount of time. A pickaxe would be useful, a framing hammer face less so.
an angle grinder would be a much better choice than hammers
Yes, with a respirator.
The ceramic edges of broken spark plugs are really good at breaking tempered glass, but tempered glass is on a certain sense the opposite of bullet proof glass.
Some of those Minnesota studded shoes would help. Can’t go slipping on the ice, can we, best to be prepared.
You guys are all coming at this like they put real money in there
https://dailyhive.com/vancouver/3m-three-million-dollars-vancouver-bus-stop-cash-stunt
i ate the onion
The marketing stunt came to a halt after just one day when the security guard noticed the metal frame of the glass case had been weakened from the constant barrage of physical pressure.
Why not just let people keep going until someone breaks the frame? Still makes for a good marketing blurb - “the iron broke before the glass did!”
The planet broke before the guard!
Because they didn’t actually want to give away any of their money. We’re toys for them and they made us dance
thanks for the article, it seems there are rules that you can only kick the glass too, that’s why everyone is kicking it.
Ya for sure. No rules and a true $3M prize will have a group of us with jeeps and winches pulling it apart in 30min
Bulletproof glass, but they didn’t allow tools? Is this the company that made glass for the cybertruck?
3M bulletproof* glass.
*kickproof
The marketing stunt came to a halt after just one day when the security guard noticed the metal frame of the glass case had been weakened from the constant barrage of physical pressure.
** Kickproof™ is a trademark name of 3M Corporation. all kicks are performed by trained professionals; not resistant to kicking; consult with your doctor before trying
That’s the point.
They didn’t want anyone to be actually able to get the money.
If it was done in Australia, I reckon the 3 mil wouldnt last 24 hours. Possible tools I’d say would be used are :- 1) Ute 2) Bobcat 3) Backhoe & 4) Bulldozer, not necessarily in that order…
This was a marketing gimmick, they had guards to make sure no one actually broke it
Well that changes things. Then probably some fluro vest wearing people (one carrying a clipboard) would unexpectedly turn up from the ‘council’ and want to take the exhibit away early cause they got the call there were some ‘thieving bastards’ about and you couldn’t trust anyone.
5 ) Boomerang
Can’t you get like, a diamond drill bit and just give it a light tap? Tempered glass breaks easily if the outside layer is compromised.
They didn’t allow tools. I wonder if those metal sole insert things could be used to help go through this.
Just embed a tip in-between the ridges of a boot.
Bullet proof “glass” isn’t just tempered glass in fact it never was the original was just glass layered with plastic but the new stuff is made from multiple layers of different materials each specialized to cover the others weakness, think fascism literally means to fassen together like a bundle of sticks that is harder to break than one stick(I don’t know why my mind went to fascism in retrospect a yin yang would be more accurate anyways)
Laminates are pretty common in many applications. Lots of things built from wood use several layers glued together. Or think of a lasagna.
Laminates are pretty common in many applications. Lots of things built from wood use several layers glued together. Or think of a lasagna.
Have they tried shooting it?
Why didn’t they just open it with a screwdriver and pry bar? Or steal the whole bus stop?
Man steps into bus whole bus stop on his back. Bus driver doesn’t even flinch. Happens every day.
I wish they did this right now. Breaking through bulletproof glass is easy with the right tools. A flying dropkick is not one of them.
I think they limited you to only being able to kick it
Are you gonna tell the guy who shows up with a .500 Smith and Wesson revolver he’s not allowed to shoot it?
What is the point then. I’d be pissed if someone was able to break a regular window by kicking it. If you have to prove that your bullet proof glass can stand up to kicks I’m not going to be confident in your product. Let people bring their own shit and show what it would take to get through it. You know, unless it sucks, which I assume to be the actual case here.
Go kick a window in your house right now. If you don’t live in a highrise, you can almost certainly kick it out.
Please don’t. Chances are high that the window is not made of security glass and if you kick the glass in, you’ll get serious cuts in your leg. That’ll range from a flesh wound to life threatening damage in a blood vessel.
Proving the strenght of the glass is only their secondary goal. Their primary goal is marketing, getting their name out there, and having people talk about their brand.
And hey, they sure succeeded, as I’ve seen this exact image way too f-ing often.
That makes sense. When I read that, my immediate thought was: demo saw.
The gimmick was you couldn’t do it with tools.
Walk up with steel stilettos and a practiced kick and you might have a shot.
The real gimmick is there isn’t really 3 million in there.
Fuck the rules, it’s 3 million, I’m going to do whatever is necessary to smash that glass 😎
The images are made to look like CCTV footage of a bus stop, but there is zero chance they left that much money in there unprotected. You could just ram it with a car and haul it home. Either it’s fake money or it was only there for a day with a crew for filming.
There was a contracted security guard there at all times, a rule that you couldn’t use any tools, and they called it off after a day when the bus stop frame started to weaken. Only $500 of real money was placed on top of a bunch of fake money.
There isn’t any actual money inside.
Define tools. Does a .50bmg SLAP count? Because there’s no way that glass is rated to take anti-mat rounds.
Of course you can’t do it without tools, I wouldn’t want to break a regular window without tools, get my hand all cut up again and shit (last time was an accident). “No tools” makes the contest meaningless.
Yeah - without tools would be impossible.
That being said, for that kind of cash, I’d accept getting my hand cut up and shit.
Well fair and even if you could one punch man that shit the glass should act differently due to the lamination so you prob would get less cut, but also do gloves count as tools?
You can’t use anything at all if it’s effective actually.
Wanna bet?
You couldn’t as you weren’t allowed to. It was a bad marketing campaign because people think “omg why it’s so easy”.
Yeah, not allowing any tools shows a lack of confidence in their glass.
The CEO that stood behind his company’s bullet proof glass while an employee shot it with an AK or something knew how to do it.
Just get a ute and some angle grinders, detach the entire thing from the bus stop qt the dead of night and take your time to work on it at home
Just make sure your hiding your identity
Use a super common ute with a number plate switcher that rolls the number plates and switch number plates in a large enough area with camera deadspots
Then ditch the car somewhere, light it up to incinerate it and switch to another vehicle in another camera deadspot
Story goes that it was only up for an incredibly brief window (heh) and that tools were disallowed for all of the pre-screened participants of the competition. Supposedly, even with all of these measures in place, something still went wrong with the glass, causing the competition to run short.
Not the glass, the metal frame was being slowly destroyed though.
Good name. You’re doing good work!
so who won
Who’s next?
Some marketing agency
Source pls
Why even participate in online discussion
Takes just about as long to type a query into Google as it does to type “source please” and wait there with your hand out
See my previous comment
Thank you. It was quite an interesting read
This was a good reminder to check a link before to click
URL check saves me once again. I can’t believe how many people just raw dog links.
I like to think of myself as a teacher first, prankster second
