• Echo Dot@feddit.uk
      link
      fedilink
      English
      arrow-up
      0
      ·
      17 days ago

      It’s more to do with the fact that we’ve paved over every permeable surface with concrete, be it for cars, buildings, walkways.

      We need to stop doing that. Focusing on cars exclusively as the problem rather than the problem being an urban design one in general side steps the actual issue.

      • FireRetardant@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        16 days ago

        Roads and buildings are typically the main impermeable surfaces. Sidewalks can be made of more permeable materials because they don’t need to handle nearly as much weight, tram lines only really need the rails, everything else can be permeable.

        Buildings can be built to either collect their rainwater for later use, or funnel their rain water directly to sewers, reservoirs, or directly into the ground. Buildings also tend to be more beneficial to society per square foot of land than roads are.

        Cars being the problem and urban design being the problem is practically the same thing, we’ve deaigned a significantl amount of our urban spaces specifically for cars.

        • Serinus@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          16 days ago

          Roads and parking lots are typically the main impermeable surfaces.

          I’m including parking garages as parking lots.

          • FireRetardant@lemmy.world
            link
            fedilink
            English
            arrow-up
            0
            ·
            16 days ago

            Are you claiming buildings to be permeable? Most just shed water away from them and often directly to a road or parking lot. A bulding would need a dedicated stormwater plan, such as a retention pond, to reduce its impacts with impermeable surfaces in urban environments.