• puppy@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    3 months ago

    “Damaging equipment” is just nonsense. I’ve got an off-grid solar system. When the battery is fully charged the solar panels simply stops producing. It has potential (voltage) but no current until you draw power. Just like a battery is full of energy but it just sits there until you draw power from it.

    All solar systems could have smart switches to intelligently disconnect from the grid as needed, some inverter already do this automatically. So it’s not a technical problem. It’s a political problem.

    • gaiussabinus@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      3 months ago

      This can cause degradation of the PN junction on the panel shortening life. The plans I’ve seen all have a resistive heater some place to dump the excess when full. Smart equipment does help mitigate most issues like moving the resistance point on the panel for lower efficiency when signaled to do so but less is not the same as none.

      • speeding_slug@feddit.nl
        link
        fedilink
        English
        arrow-up
        0
        ·
        3 months ago

        How does it damage the PN junction of the panel is open circuit or barely loaded? It doesn’t seem logical that this would damage the panel, but I’m open to being proven wrong.

        There are all kinds of follow up questions to ask as well, but I think the main one is how big an effect are we talking?

        • gaiussabinus@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          3 months ago

          Not a huge effect now with smart systems but if you leave solar panel disconnected from everything and out in the sun for weeks at a time you will damage the panel. Open circuit voltage is higher than operating voltage and higher voltage will break down insulation. PN depends on the insulating properties of a doped layer. If I remember correctly electron tunneling causes damage by making the band gap smaller