• musubibreakfast@lemm.ee
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 day ago

      You don’t need any of that nonsense. Real men insulate themselves with their feelings. As for electricity, I make that myself. They don’t call me the love dynamo for no reason.

    • Maalus@lemmy.world
      link
      fedilink
      arrow-up
      0
      ·
      1 day ago

      The pipes go into the wall, older houses have them running outside the wall, right next to it, especially for stuff like radiator pipes. Wiring goes into the wall and gets plaster put over it. Saw a false ceiling in bathrooms too, since that had a lot of little lights so they probably ran it that way to keep it simpler. A lot of buildings just aren’t insulated, especially older ones, walls do an okayish job already. But newer buildings have styrofoam on the outside of the building. Makes em pretty much have the exact same temp year round, unless you open a window.

      • squaresinger@lemmy.world
        link
        fedilink
        arrow-up
        0
        ·
        1 day ago

        This. I live in a concrete building with insulation on the outside. In my area it does get moderately cold (down to -5 or -10°C). In the four years I have lived here, I used the heaters I think on 3 days total.

        • Maalus@lemmy.world
          link
          fedilink
          arrow-up
          0
          ·
          1 day ago

          I mean, if you get winters that go to -20, you still have to heat it up during it. But most it goes down is like 15 degree C? Not comfortable, but you probably won’t freeze unless you don’t heat at all

    • argh_another_username@lemmy.ca
      cake
      link
      fedilink
      arrow-up
      0
      ·
      1 day ago

      Pipes are installed before the mortar (I think that’s the name), sometimes carving bricks. Wires pass inside flexible tubes (literally translated to conductors). This has the advantage that, if the tube is wide enough, we can pass more wires.

      • vithigar@lemmy.ca
        link
        fedilink
        arrow-up
        0
        ·
        1 day ago

        “Conduit” is the word for those tubes for wires. Probably a shared etymology with “conductor” though.

        Having the pipes in the mortar/bricks sounds like a maintenance nightmare.