:-D
I’m in no position to toss to much shade at the data hoarder community. I’m personally sitting on close to 64TB of media I’ve collected over the years. In my case, most of it legitimately acquired, either by myself or by family, but still. It adds up and most of it hasn’t been accessed more than once or twice.
So long as you don’t need to stockpile old shows you never watch, you can get by on an old laptop and possibly an external drive.
My homelab started out on a Raspberry Pi 2b. Most of the hardware Ive brought online were dumpster specials someone else didn’t want. It can be done on the cheap. Won’t necessarily be reliable, but it can be done cheap.
Well, glad I walked away from SmartThings a couple of years ago. Went with Home Assistant and have never looked back.
At the time I remember being concerned about whether they were going to kill SmartThings off or start charging a subscription as the hub called home for everything. Server time costs and they weren’t charging for it. TANSTAFL. Kinda surprised it’s still alive at all
Yes. Currently using Gemma4:12b behind OpenWebUI and Hermes Agent plus a few lighter models for OCR and tagging in Paperless.
From what I’ve noticed, yes. Considerably.
I’m not knowledgeable enough to explain why, but something about running Baremetal --> VM --> Docker --> Nextcloud-AIO is massively slower than running Baremetal --> Docker --> Nextcloud-AIO. Hell, Nextcloud-AIO on a Pi4 was running faster than when I put it in a much roomier VM.
Someone tried to explain it to me but all I understood was that the databases don’t like that. Something about nested virtualization restricting performance.
Oddly I didn’t run into the same issue when I ran Nextcloud-AIO off of a Digital Ocean VPS. Not sure what they are doing differently, but that was running just as fast as bare metal.
I use Nextcloud to host my calanders. With caldav (what nextcloud uses under the hood), reminders are handled by the client. I use Apple’s Reminders app on my phone and Thunderbird on my laptop.
Nextcloud does have a built in calandering app, but I’ve not used it much. I think it can do email notifications of calander events.
It’s all good. The name came out a random name generator a while back. I liked the name enough that I started using it generally for my fediverse presence. No meaning beyond that.
I currently run the official Nextcloud-AIO. No issues once I got the reverse proxy figured out. That was a bit of a pain at the time. Caddy hadn’t yet become a popular choice for reverse proxies.
I will say that Nextcloud really wants dedicated hardware, not a VM, or proformance will suffer. Still useable but it tends to to be a bit slower. Can’t vouch for the office suite as I just don’t use it.
Wait, do we actually have unemployment assistance in the US? I thought it was just a slush fund for boondoggles I was forced to pay into. Every time I’ve tried to apply for it over the last 20 years I was rejected.
I’ve had mixed success with the open source drivers for printing. Sometimes they work, sometimes not. Just depends on the individual printer model. Newer models seem to just work.
Attached scanners though always seem to need their proprietary drivers to function.
Up side, Brother doesn’t seem to pack in any useless software with their Linux drivers.
Brother Printers have a well deserved reputation. They work. You will probably need their proprietary drivers (which you can get from their website), but after that they just work.
I know they make a .deb available, but I think there’s also a .rpm if you’re repping Redhat land.
It’s been a while since I used it, but I think kmymoney has some basic features in that direction.
With the caveat that I last played with Gentoo 20 years ago… I am almost certainly a bit out of date.
If I remember correctly it, it explicitly recommended that you use at least the minimal gentoo live disk to get your system into a running state. You’d be working from the live cd for the first couple of sections before booting into a very basic install on your hard disk. From there you would compile the rest of your system.
Even the minimal disk provides all of the tools that you need to bootstrap the system. Sources for everything else are downloaded as they are needed. Come to think of it, I think the full desktop live dvd was fairly new at that time, in it’s first or second release.
Even at that time the Gentoo manual was incredibly well written and is in my opinion the gold standard for how user documentation should be written. I had been toying with linux for about 3 months at that point and was able to get a working desktop system up and running in about a month , mostly just waiting for things to compile on the slow processors we had back then. I would run a few commands and then go off and do something else for a few hours. rinse and repeat.
Linux has run on ARM procs for some time. Software is a little hit or miss, but most things have a compiled build for it at this point. A lot of the big servers are running ARM processors due to potential power savings.
The popularity of the Raspberry Pi really increased the number of projects with ARM builds as well. It’s been possible to run a pretty decent desktop stack for 10 or 15 years. When the Pi2B came out.
If you happen to run across a project that is not available on ARM you might give a go at compiling it yourself. About half of the time it’s not too difficult and a good beginner project.
Most of the time I use Nextcloud. If I can’t wait for the file to sync I’ll use either email or a jump drive depending on which devices I’m moving data between. I
If I remember that I can, I’ll occasionally use bluetooth to send from my phone to one of my computers.
Last I checked (roughly 2 years ago, preRAM price spike) SBCs weren’t the most cost effective option for self hosting anymore. I would actually look into used thin clients or desktops. Even new, the hardware is often less expensive and more capable than SBCs. Sometimes they’re also more power efficient.
As for community support for the SBCs other than RPi, for most of them it has been close to non existent. Some better than others but the RPi was the community favorite and got all the attention due to its low price at the time.
No. Just no. I trusted Google in the past. Never again.
Meh. Reminds me a bit of the kerflufel when SystemD came out and largely replaced the V init system that came before. A whole bunch of religious adjacent arguments, at high volume with not much intelligence or understanding. It’ll pass.
All I need to know is does it solve a problem I have, does it work, is it stable, and is it secure.
Only warning I’ll give is that you should probably not get too used to your off site LLM models (Claude, GPT or whatever you’re using). Pricing seems unsustainable and the hype makes it feel like a bubble similar to the dot com bubble.
Might want to devote some time to trying to bring your LLM usage in-house. There is no telling who will survive the crash and it’s not always the “best” one.
Why so many downvotes. Looks like a decent project. Am I missing something?
I run both Navidrome and Jellyfin. I would say that Navidrome is probably simpler of the two to setup if you’re only interested in music.
In both cases uploading new music is the same. Upload the tracks to your media directory and wait for the next scan.