I’ve been waiting to finish up with some major life stuff before diving into the world of 3D printers. Now that is finally behind me, and I am currently trying to find out which printer I want so that I can place an order.

So far I’ve set my eyes on the new Prusa CORE One. It ticks a lot of the boxes that I think I am after, including:

  • As open as I can get (before going into that Voron-stuff, which I think I’m not ready for). I don’t want to be bogged down with having to run proprietary slicers through Wine and things like that. I am not sure how big of an issue that is with e.g. Bambu or Creality (if at all), but I’ve seen enough rug-pulls and enshittification processes that I don’t really want to risk that. I want to be sure that I can use FOSS tools such as Blender and FreeCAD for design, and similarly open slicers, and the whole workflow will work just fine.
  • As future-proof as I can possibly hope for. I think the upgrade path from the MK4 to CORE One shows that they are serious about sustainability and longevity of their devices, and as far as I can tell, I should have no troubles sourcing replacement parts. I also want to support companies with this philosophy.
  • Has a decent print volume (I know there are bigger, maybe I will be constrained by this at some point?)
  • Enclosed - a major reason I did not want the MK4S was that it was not enclosed (but maybe you can get an enclosure?). It will be placed in my study where I spend most of my computer time (which often times is a lot, so I imagine I will be in the room while it is printing). I imagine, with the additional filter, that it will be better with an enclosure. Also, it will be easier to keep good temperature control during prints, as it can get cold here during winter.
  • Locally produced (I’m EU based).

I understand that other manufacturers provide more “bang for the buck” and that I in that sense will be overpaying feature-wise. I am fine with that given my emphasis on the above criteria.

However, I am a complete newbie to 3D-printing. I am sure there are some limitations I have not thought about, and I was wondering if there are any major things I have not thought about that would actually affect me negatively and should make me reconsider this model?

  • AliasVortex@lemmy.worldEnglish
    0·
    9 days ago

    Depending on how much you value open source vs domestic production, part of me thinks that you may want to consider the Sovol SV08. Sovol is based out of China, but that printer is basically a Voron 2.4 modified for mass production (ie much of the printer comes preassembled), and because of it the printer is very open source, as in here’s the GitHub repo. My only major concern would be that the machine ships with a non-standard hot end, however I recently learned (Here) that the community already has a mod to fix that. You also gain a much bigger build volume, for a fraction of the upfront investment.

    I’m also somewhat hesitant to recommend a machine that isn’t out and doesn’t really have any reviews yet. With any new product launch like this, I’d almost guarantee that there will be a teething period as the bugs, glitches, and hiccups all get worked out (as goes the early adopter tax). Which means that you may face a slightly steeper leaning curve as someone new to the hobby (Prusa has been around for a hot minute, so I don’t expect it to be too bad, but it’s still worth mentioning). That said, if none of that scares you and if you’re already prepared for the pricetag, Prusa’s are known to be absolute workhorses, there’s no reason they can’t be entry level machines.

    • WFH@lemm.eeEnglish
      0·
      9 days ago

      The SV08 has been out since at least summer. I’ve had mine since September and I’m super satisfied with it. It is not a beginners machine however, there are a couple of mandatory tweaks and upgrades to make it usable. Nothing unsurmountable but having modded the shit out of my Ender 3 helped a lot.

      • AliasVortex@lemmy.worldEnglish
        0·
        9 days ago

        I don’t personally own one, so that’s really good to know! I mostly thought of it since it checked most of what OP was looking for, without being a full on Voron. That’s said, I’m not sure how much of a beginner machine the Core One will be either. Regardless, I’ll add a proceed with caution on my recommendation.

        Out of curiosity, what upgrades did you have to make to sv08?

        (I also graduated from the Thessian Ender 3 program and went to a v2.4)

      • dorkage@lemmy.caEnglish
        0·
        9 days ago

        I have had a SV08 for a few weeks. Had a K1 Max for the same time period. I had 2 or two failed prints on the SV08 and about 3 dozen failed prints.

        I returned the K1 Max (with huge struggles with support)

        Previously I had a Labist ET4 that only worked for a out 5 prints total before giving up on it.

        I will agree with your statement. If you are willing to put in a bit of research on YouTube and GITHUB and swap a few parts and spend a few hours you’ll have a hilarious large printer that just spits out almost anything you throw at it, besides ABS and ASA… For now…