Personally I love the idea of a smart home only if its self hosted and running on fully open source software, also never put a gun near an unattended printer :3
Zwave is superior for not clogging up the 2.4GHz airspace, both are darling to use with hass. Wifi is a close third for usability but suffers from bogging local wifi/airspace without interoperability without a controller of some kind being online. Zigbee/Zwave both can function somewhat even with the local server offline
Home assistant, as a central system (it basically let’s you wire anything into anything!). The smart switches etc should be esp8266 or esp32 based. You can then flash either tasmota or esphome to them.
Since your server will likely be Linux based, it’s open source all the way to the bare metal, (or at elast as close as possible).
My current system almost doesn’t notice if the Internet dies. Also, if you nuke critical components, in the worst case, it still defaults to dumb control behaviour (physical switches still work etc).
I still know where the kill switches are however. I’ve also made sure it doesn’t have control of anything mobile, other than the robo vacs, and I’m fairly sure I could take them in a fight.
Personally I love the idea of a smart home only if its self hosted and running on fully open source software, also never put a gun near an unattended printer :3
Never connect an unattended printer.
Zwave and ZigBee baby!!! It’s been Awesome so far.
Zwave is superior for not clogging up the 2.4GHz airspace, both are darling to use with hass. Wifi is a close third for usability but suffers from bogging local wifi/airspace without interoperability without a controller of some kind being online. Zigbee/Zwave both can function somewhat even with the local server offline
And if anybody is wondering if that exists, it’s called Home Assistant.
I really need to get back into troubleshooting why it won’t work in my instance. Got into a habit of it but I got distracted by a crazy lady
Home assistant, as a central system (it basically let’s you wire anything into anything!). The smart switches etc should be esp8266 or esp32 based. You can then flash either tasmota or esphome to them.
Since your server will likely be Linux based, it’s open source all the way to the bare metal, (or at elast as close as possible).
My current system almost doesn’t notice if the Internet dies. Also, if you nuke critical components, in the worst case, it still defaults to dumb control behaviour (physical switches still work etc).
I still know where the kill switches are however. I’ve also made sure it doesn’t have control of anything mobile, other than the robo vacs, and I’m fairly sure I could take them in a fight.
Last I checked the only fully open stuff is one manufacturer’s IBM power 9 workstation and several Chromebooks
Is it better in embedded stuff? Last openWRT device I ran needed a closed binary for network