• glizzyguzzler@lemmy.blahaj.zoneOP
    link
    fedilink
    arrow-up
    0
    ·
    edit-2
    4 months ago

    You can run something like a house off a generator with one if the main breaker is off; in an emergency and the operation reasonably well planned out (don’t overload wall lines you plugged into, etc.) it might be a net benefit. On the reg is asking for death cause there’s safe ways to do it that sane people would plan for on the reg

    • biscuitswalrus@aussie.zone
      link
      fedilink
      arrow-up
      0
      ·
      4 months ago

      That would surely only power a single circuit (due to isolation) and if you have to be selective, a critical circuit like your fridge isn’t really likely to have a wall port on the same circuit near where you’d happily have your fume emitting generator…

      I’m no electrician but I’ve generally installed automatic transfer switches (ATS) for mine site server cabinets that then power UPS racks and the transfer switch automatically or manually can switch from mains to generator if mains power goes out (which at a mine is all the time). I feel like a similar and safe system must exist for homes. Or something no different to switching solar to grid and back.

      But again, not an electrician.

      • glizzyguzzler@lemmy.blahaj.zoneOP
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        If you disconnect the mains then the power will be backfed through one of the circuit breakers and back out to others. If the breaker you plugged naughty plug into is off, it’s isolated. Otherwise, it’ll power whatever circuit breakers are on on the breaker panel.

        If you don’t disconnect from the mains you’ll kill a person working to fix the electrical lines for your neighborhood.

        Yes, safe and automatic things exist to switch automatically - or even hook up a generator in a pinch manually but safely (no naughty plug needed).

        Defo don’t backfeed your abode unless you’re gonna die due to some major emergency!

      • Toes♀@ani.social
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        In your typical household panel there is no isolation. If you’re lucky there’s a GFCI for the bathroom and kitchen.

          • glizzyguzzler@lemmy.blahaj.zoneOP
            link
            fedilink
            arrow-up
            0
            ·
            3 months ago

            In Murica, the kettle tripping a circuit breaker would knock out the fridge if the fridge was on that breaker circuit. Anything not on that circuit breaker is fine.

            No isolation here just means that if the breaker doesn’t trip, the kettle’s circuit and fridge’s circuit are connected together in the circuit breaker box by copper bars.

        • Norah - She/They@lemmy.blahaj.zone
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          3 months ago

          Which is insane to me. RCDs have been required on all household circuits for decades in Australia. Literally saved my life when I was doing dumb shit as a kid.

          Edit: Also, by typical, you mean a typical American household :P

          • Toes♀@ani.social
            link
            fedilink
            arrow-up
            0
            ·
            3 months ago

            I was thinking British, but my understanding of the technology you mentioned I don’t see any clear reasons why it would prevent back feeding?

            • Norah - She/They@lemmy.blahaj.zone
              link
              fedilink
              English
              arrow-up
              0
              ·
              3 months ago

              It didn’t. The mains was on, and the plug was in my hand. My dad, in a typical show of his wonderful parenting, told 9-year old me to plug it in while he went outside to the fusebox to turn the main circuit off. The power came back on while I was walking out to the back shed. I still got a pretty big zap, in the eyes of a kid anyway.

      • orcrist@lemm.ee
        link
        fedilink
        arrow-up
        0
        ·
        3 months ago

        Circuits are connected to the circuit breaker, so it would power whatever is on the breaker. (Or more precisely, whatever is on that leg of the hot.)