BraveLittleToaster@lemmy.world to NonCredibleDefense@sh.itjust.worksEnglish · 6 months agoWhy doesn't the military do this? are they stupid?lemmy.worldimagemessage-square70fedilinkarrow-up11arrow-down10
arrow-up11arrow-down1imageWhy doesn't the military do this? are they stupid?lemmy.worldBraveLittleToaster@lemmy.world to NonCredibleDefense@sh.itjust.worksEnglish · 6 months agomessage-square70fedilink
minus-squarebufalo1973@lemmy.mllinkfedilinkEnglisharrow-up0·6 months agoIf you fire a laser against a mirror, it bounces but raises the heat of the mirror so you end up melting the mirror and destroying the drone.
minus-squareskulblaka@startrek.websitelinkfedilinkEnglisharrow-up0·6 months agoI may risk being too credible here, but a $80 drone is a lot more expendable than a $40m laser tank. The drone can be considered a consumable. Hell, mark the drones down as ammo.
minus-squareBigMikeInAustin@lemmy.worldlinkfedilinkEnglisharrow-up0·6 months agoBut the drone stays in the air by making wind, which would cool down the mirror?
minus-squareCanadaPlus@lemmy.sdf.orglinkfedilinkEnglisharrow-up0·6 months agoUnironically yes. If that’s no enough, add water.
minus-squareBigMikeInAustin@lemmy.worldlinkfedilinkEnglisharrow-up0·6 months agoA laser attack during a hurricane would really surprise the target.
minus-squaremindbleach@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agoDo not point laser at remaining eyewall.
minus-squareJumuta@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agonot if you have total internal reflection
minus-squaremindbleach@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agoIn all seriousness, wavelength-specific dielectric mirrors can approach six nines of reflectivity. The hard part is hitting the mirror instead of the drone.
minus-squarethreelonmusketeers@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agoJust make the mirror as wide as the drone! Oh, wait…
minus-squareSocsa@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agoAnd keeping the mirror surface clean
minus-squaremindbleach@sh.itjust.workslinkfedilinkEnglisharrow-up0·6 months agoYeah I guess you can’t pulse-ablate a mirror made of plastic. Though it invites a backup strategy of spraying your enemies with molten drone.
minus-squareCanadaPlus@lemmy.sdf.orglinkfedilinkEnglisharrow-up0·6 months agoDepending on how long you do it, how powerful the laser, and how quickly it can cool off at the same time. And like the other guy said, you can make really good mirrors if you only care about one wavelength.
If you fire a laser against a mirror, it bounces but raises the heat of the mirror so you end up melting the mirror and destroying the drone.
I may risk being too credible here, but a $80 drone is a lot more expendable than a $40m laser tank. The drone can be considered a consumable. Hell, mark the drones down as ammo.
But the drone stays in the air by making wind, which would cool down the mirror?
Unironically yes. If that’s no enough, add water.
A laser attack during a hurricane would really surprise the target.
Do not point laser at remaining eyewall.
not if you have total internal reflection
In all seriousness, wavelength-specific dielectric mirrors can approach six nines of reflectivity.
The hard part is hitting the mirror instead of the drone.
Just make the mirror as wide as the drone! Oh, wait…
And keeping the mirror surface clean
Yeah I guess you can’t pulse-ablate a mirror made of plastic.
Though it invites a backup strategy of spraying your enemies with molten drone.
Depending on how long you do it, how powerful the laser, and how quickly it can cool off at the same time.
And like the other guy said, you can make really good mirrors if you only care about one wavelength.